MicroLubricant ML-725 is a naturally derived minimal quantity lubricant typically applied in “drops” to eliminate traditional flood coolant applications.
MicroLubricant ML-725 is ideally suited for near dry machining operations.
MicroLubricant ML-725 is excellent on both steel and aluminum and it is the lubricant of choice for machining mixed metals.
MicroLubricant ML-725 is the ideal replacement for any operation using water dilutable coolants.
All metal operations benefit from MQL due to the unique lubrication properties, including but not limited to the specific operations listed below:
Directions for Use
MicroLubricant ML-725 is used as received. The lubricant is typically applied directly to the cutting tool through an adjustable applicator that does not atomize.
MicroLubricant ML-725 must contact the tool before cutting or forming begins. Increasing the feed rate eliminates hot parts and reducing the feed rate eliminates hot tooling.
Clear Red Liquid
MicroLubricant ML-725 is available in 1 gal. containers, 5 gal. pails, 55 gal. drums, and 330 gal. totes.